Author Topic: Renault immobiliser bypassing code  (Read 56592 times)

0 Members and 1 Guest are viewing this topic.

delambo

  • Global Moderator
  • Full Member
  • *****
  • Posts: 47
    • Southern Auto Problem Solutions
    • Email
Re: Renault immobiliser bypassing code
« Reply #15 on: February 22, 2008,17:36:13 »
The UCH is the body control mudule.  It is inside the fuse box.

It is up to you.  You can desolder the 95p08 and post it to me, I can modify it and send it back, but I do not get a 100% working dump every time.  If you do this you may need to post it back and forward a few times before it works.  If you can program it by yourself then I can send you dumps and you can test them quickly rather than wait for the postman.

If you want you can send me the 93cXX from the UCH and I can read it and program you an emulator.

It is up to you.

Mulja tv repair portal

Re: Renault immobiliser bypassing code
« Reply #15 on: February 22, 2008,17:36:13 »

mulja

  • Administrator
  • Hero Member
  • *****
  • Posts: 336
    • Tv repair portal
    • Email
Re: Renault immobiliser bypassing code
« Reply #16 on: February 22, 2008,18:14:39 »
I will try to find the UCH 93cxx in fuse box
and i can read myself i have programmer for it
and give to you dump it`s will help you to programm emulator
« Last Edit: February 23, 2008,11:27:16 by mulja »

mulja

  • Administrator
  • Hero Member
  • *****
  • Posts: 336
    • Tv repair portal
    • Email
Re: Renault immobiliser bypassing code
« Reply #17 on: February 25, 2008,17:48:03 »
I am ordered programmer for st95p08 it`s takes some few days before i will get it  :smile: then i read eeprom and post it here ok.

Thanking you Delambo talk to you later.

Mulja tv repair portal

Re: Renault immobiliser bypassing code
« Reply #17 on: February 25, 2008,17:48:03 »

delambo

  • Global Moderator
  • Full Member
  • *****
  • Posts: 47
    • Southern Auto Problem Solutions
    • Email
Re: Renault immobiliser bypassing code
« Reply #18 on: March 01, 2008,07:06:30 »
It is really important to remember you must use hot air to desolder the 95p08.  It is glued to the board and you must soften the glue.  I tried to desolder one using traditional methods and pulled 2 legs off the the 95p08, I also damaged the PCB.  95p08 are hard to find if you do damage it, but you can get them from Mark 5.

Good luck.

mulja

  • Administrator
  • Hero Member
  • *****
  • Posts: 336
    • Tv repair portal
    • Email
Re: Renault immobiliser bypassing code
« Reply #19 on: March 01, 2008,08:53:44 »
Just got thru door programmer
Again all details off
Renault SCENIC 1.9DCI
ECU
BOSH
0 281 001 934

HOM8200039569

8200078730


Here is dump of eeprom ST95p08

« Last Edit: March 01, 2008,09:09:54 by mulja »

delambo

  • Global Moderator
  • Full Member
  • *****
  • Posts: 47
    • Southern Auto Problem Solutions
    • Email
Re: Renault immobiliser bypassing code
« Reply #20 on: March 04, 2008,04:16:05 »
Your file should be 1024 bytes but there is one line of data too much.  I deleted this line of data and made immo off for you but you must check 100% that you read the chip correctly BEFORE you use my dump or else the original dump will be lost for ever.

Check your PM for rar pass.  I password protected it for security from car theifs and people wanting to sell the dump on ebay!  AQny good members who want the password just ask me.

Mulja tv repair portal

Re: Renault immobiliser bypassing code
« Reply #20 on: March 04, 2008,04:16:05 »

mulja

  • Administrator
  • Hero Member
  • *****
  • Posts: 336
    • Tv repair portal
    • Email
Re: Renault immobiliser bypassing code
« Reply #21 on: March 04, 2008,17:20:25 »
Just thru door trying
I programm eeprom with your dump and car not start it all
After i put your dump immo light on the dash not light it all
it`s should be like that?

i write and read verify and every thing in the chip looks ok
programmer work ok

Not have a chance today to try put back original dump


Tell you from start what happen on that car was broke belt and man continued driving to get to home and battery go flat
next morning he charge battery and car not start some time for 2,3 sek
flashing immo on the dash.

Brobably fault somewhere else???????????

any ideas????????

mulja

  • Administrator
  • Hero Member
  • *****
  • Posts: 336
    • Tv repair portal
    • Email
Re: Renault immobiliser bypassing code
« Reply #22 on: March 05, 2008,08:03:46 »
I found in internet

may be i need buy that

After decoding of Renault injection computer using our RENAULT RESET TOOL or by entering security code, in most cases you
can start engine, but some of injection computers can not operate without immobiliser code stored in their memory. Diesel
EDC15C3, DCU3R and MSA15, petrol SIRIUS32 (except these for 1.4L engine) and FENIX5 for 2.0L 16V engine require working
unlocked (with good key) immobiliser unit or our Renault immobiliser emulator. Include connection manual.

http://shop.cmdelectronics.com/index.php?act=viewProd&productId=13


mulja

  • Administrator
  • Hero Member
  • *****
  • Posts: 336
    • Tv repair portal
    • Email
Re: Renault immobiliser bypassing code
« Reply #23 on: March 05, 2008,09:32:16 »
Probably you can supply me with it
i can buy of you

if it`s help me

delambo

  • Global Moderator
  • Full Member
  • *****
  • Posts: 47
    • Southern Auto Problem Solutions
    • Email
Re: Renault immobiliser bypassing code
« Reply #24 on: March 05, 2008,16:59:27 »
I suspect it will not help you.  It sounds like you have a problem other than immobiliser.  The emulator you mention is not as good as the emulator I supply.  The emulator on the cmd site will only work on a new or virginised ECU.  The emulator I supply will work on any ECU but must be coded to the ECU...

...but no emulator will work on your ECU as they are all K-line based where as your ECU is CAN based.  I think that nobody makes a CAN emulator yet.

The dump I sent you should work, and if the immo light is not flashing then I think it has worked.  I think maybe the ECU is faulty.  If it since the battery was charged then you must check your voltage regulators, transistors and drivers.

Mulja tv repair portal

Re: Renault immobiliser bypassing code
« Reply #24 on: March 05, 2008,16:59:27 »

 

Powered by EzPortal
download
download
download
download
download