Author Topic: Baird TE-40LED-AL = Dead (Read 4773 times)

Tmg · « **on:** January 24, 2014,21:25:54 »

Hello
I have a Baird TE-40LED-AL and it is dead the power supply board number is BSFP4120-001A (picture attached)
Has anyone had this fault and did the power supply cure the tv, or is it the main board
I have no voltages apart from a standby 5v from the board but the main power will not be turned on and no lights
thanks in advance
Regards
Tony

Mulja tv repair portal · « **on:** January 24, 2014,21:25:54 »

jordan · « **Reply #1 on:** January 25, 2014,03:23:04 »

Check Q4 (2SK3568) and elements near this-check drive elements of this Q4,check regulator 3,3V (U5) on main board

clark97 · « **Reply #2 on:** January 25, 2014,07:35:59 »

You can use an older mlt199tl supply the black one, its pin for pin and works fine. I had one in about a year ago and was having trouble sourcing parts so I fitted one of those and its still running.

Mulja tv repair portal · « **Reply #2 on:** January 25, 2014,07:35:59 »

Tmg · « **Reply #3 on:** January 25, 2014,17:34:52 »

Hi
Thank you for your replies and help I will investigate this over the weekend

Mulja tv repair portal · « **Reply #3 on:** January 25, 2014,17:34:52 »

Mulja tv repair portal

News: