Author Topic: Nissan Almera n16 2005 Idle Relearn  (Read 2751 times)

0 Members and 1 Guest are viewing this topic.

leonard085

  • Jr. Member
  • **
  • Posts: 28
    • Email
Nissan Almera n16 2005 Idle Relearn
« on: November 04, 2014,12:36:34 »
After doing a throttle body cleaning, The idle speed varied between 1500 to 2000 rpm
I have a scan tool ( Autel MaxiDas ds708) I went to the relearn procedures, but the scan tool refused
to start the procedure, I got an error saying it cant complete the procedure unless the rpm
 was below 1300 rpm
I tried a few different techinques but they did not work out
what I did in the end was, I started the car, then I put it into gear
I pulled up the hand braked as far as I could, I then let my foot off the clutch slowly, watching the rpm, the minute it went below 1300 rpm, I pressed start on my scan tool, this brought the rpm to about 1200 rpm, still to high
but it was below 1300 rpm now, I was now able to do the idle relearn procedures
I have also attached the manual method, It will work for most idle relearns on Nissan (as long as the idle is not too high)

Mulja tv repair portal

Nissan Almera n16 2005 Idle Relearn
« on: November 04, 2014,12:36:34 »

 

Powered by EzPortal
download
download
download