Author Topic: BUSH DLED32165HD DEAD  (Read 7183 times)

0 Members and 1 Guest are viewing this topic.

kennyc

  • Sr. Member
  • ****
  • Posts: 158
Re: BUSH DLED32165HD DEAD
« Reply #15 on: April 10, 2015,05:58:46 »
Hi Fix2003 ,does this work on all the vestel 17MB boards or just on the MB60?

Mulja tv repair portal

Re: BUSH DLED32165HD DEAD
« Reply #15 on: April 10, 2015,05:58:46 »

fix2003

  • Hero Member
  • *****
  • Posts: 230
Re: BUSH DLED32165HD DEAD
« Reply #16 on: April 11, 2015,02:46:16 »
not yet had one later than mb60 to try


but I do not think this will work on sets before mb60
vince

mickcon1

  • Newbie
  • *
  • Posts: 2
    • Email
Re: BUSH DLED32165HD DEAD
« Reply #17 on: May 11, 2016,07:01:44 »
hi there how do you program the bin files back to the tv while its on flashing light have copyed the files from working set just cant program it back to same set thats sittting on flashing front led thanks

Mulja tv repair portal

Re: BUSH DLED32165HD DEAD
« Reply #17 on: May 11, 2016,07:01:44 »

fix2003

  • Hero Member
  • *****
  • Posts: 230
Re: BUSH DLED32165HD DEAD
« Reply #18 on: May 12, 2016,03:20:57 »
if the led is flashing I do not think you can do it from usb stick
you need bin files for 24xxx and 25xxx and suitable programmer

the 24/25 files will be special to each set
but sometimes you can get away with files for similar set so worth trying
vince

mickcon1

  • Newbie
  • *
  • Posts: 2
    • Email
Re: BUSH DLED32165HD DEAD
« Reply #19 on: May 12, 2016,05:14:10 »
so how do i get the 24xxx and 25xxx files would i need to lift the eeprom and read it

fix2003

  • Hero Member
  • *****
  • Posts: 230
Re: BUSH DLED32165HD DEAD
« Reply #20 on: May 13, 2016,03:25:47 »
yes would need to remove and read 24xx and 25xx from good working set of same spec
vince

Mulja tv repair portal

Re: BUSH DLED32165HD DEAD
« Reply #20 on: May 13, 2016,03:25:47 »

swan47

  • Newbie
  • *
  • Posts: 1
    • Email
Re: BUSH DLED32165HD DEAD
« Reply #21 on: January 12, 2017,14:32:35 »
Hello
         I have the same set.Bush DLED32165HD.. comes on 7 blinking red led`s and that it.was guesting it was the psu.but reading a lot more it the main av board..it need firmware updates.mine mb is 17MB82S   32180896..if you can help me out send me a link via my email i be most greatful [email protected]...

jordan

  • Hero Member
  • *****
  • Posts: 853
Re: BUSH DLED32165HD DEAD
« Reply #22 on: January 12, 2017,14:44:39 »
17MB82S
Greeting from Slovenia
Jordan Čebron

filipemisa

  • Newbie
  • *
  • Posts: 1
Re: BUSH DLED32165HD DEAD
« Reply #23 on: October 07, 2018,06:17:17 »
olá pode enviar o software para mim, o link esta off

 

Powered by EzPortal