Author Topic: Panasonic DMR-EZ49VEB  (Read 10629 times)

0 Members and 1 Guest are viewing this topic.

kennyc

  • Sr. Member
  • ****
  • Posts: 163
Panasonic DMR-EZ49VEB
« on: June 06, 2015,06:43:20 »
Hi guys ,This is a nearly new combi ,it has no hard drive so its just a simple combi . Problem is that it just flashes "please wait " and does nothing else . Have held the channels + and - buttons down but still doesnt fix . Dont know if its a fault or just a reset it needs . Only happened after the clocks went back . Any clues ? Thanks

Mulja tv repair portal

Panasonic DMR-EZ49VEB
« on: June 06, 2015,06:43:20 »

jordan

  • Hero Member
  • *****
  • Posts: 896
Re: Panasonic DMR-EZ49VEB
« Reply #1 on: June 06, 2015,09:23:28 »
"Please wait" or "EXT-L" displayed
1.Press EXT-L button on RC
2.Unplug then plug-in appliance
Greeting from Slovenia
Jordan Čebron

downunder

  • Hero Member
  • *****
  • Posts: 1187
Re: Panasonic DMR-EZ49VEB
« Reply #2 on: June 06, 2015,16:34:58 »

Hi Ken,

Typically caused by bulged capacitors in the power supply and directly under the DVD loader which you'll have to remove along with the digital pcb under the loader. CH+/- is not the reset method and I've never known an occasion where a reset cures this fault.

Bruce

Mulja tv repair portal

Re: Panasonic DMR-EZ49VEB
« Reply #2 on: June 06, 2015,16:34:58 »

kennyc

  • Sr. Member
  • ****
  • Posts: 163
Re: Panasonic DMR-EZ49VEB
« Reply #3 on: June 10, 2015,08:51:40 »
Hi gents ,will try your solution later jordan and let you know . Only tried the reset with the CH+and- together because it says thats a reset in the manual Downunder . As you say it doesnt work anyway . Will strip down if Jordans idea doent work ,.Thanks for the help gents

kennyc

  • Sr. Member
  • ****
  • Posts: 163
Re: Panasonic DMR-EZ49VEB
« Reply #4 on: June 13, 2015,07:37:18 »
Hi gents ,tried your solution Jordan but the only button on the remote says EXT- LINK and I tried it a few times with no luck. All the caps were OK as well Downunder so afraid its a goner . Thanks anyway

michael first

  • Hero Member
  • *****
  • Posts: 201
    • Email
Re: Panasonic DMR-EZ49VEB
« Reply #5 on: June 13, 2015,17:11:03 »
Hi,if there is a button AV on the remote,try that one,assumed the remote and the ir receiver are OK.

just a thought.
« Last Edit: June 13, 2015,17:12:53 by michael first »

Mulja tv repair portal

Re: Panasonic DMR-EZ49VEB
« Reply #5 on: June 13, 2015,17:11:03 »

downunder

  • Hero Member
  • *****
  • Posts: 1187
Re: Panasonic DMR-EZ49VEB
« Reply #6 on: June 14, 2015,03:26:11 »

Hi Ken,

I did upload the service manual for this model some time back. Take a captain cook in the downloads area.

Bruce

kennyc

  • Sr. Member
  • ****
  • Posts: 163
Re: Panasonic DMR-EZ49VEB
« Reply #7 on: June 19, 2015,08:21:28 »
Hi Michael and Downunder . Never got to the bottom of the problem so gave it back to customer who is going to Currys to try and get her money back . Only 18 months old . Thanks anyway

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Re: Panasonic DMR-EZ49VEB
« Reply #8 on: August 29, 2015,11:34:49 »
Hi Kennyc,

Not now useful, but had one where an error code popped up - U80.

Did a factory reset and problem cleared - Guess not the same as 'Please Wait' but a thought - Chris.

Mulja tv repair portal

Re: Panasonic DMR-EZ49VEB
« Reply #8 on: August 29, 2015,11:34:49 »

 

Powered by EzPortal
download
download