Panasonic SA-AK22 - RCU doesn't.

[Turnip]

Hi folks,

Guess we have a Panasonic chap about in our Bruce -

This Hi-Fi works normally with all the tact buttons doing what they should. RCU does nothing but registers on IR tester, and set IR receiver shows input, as output goes up and down a bit.

Had such problems B4 where RCU emits the wrong code so tried a 'Click' programmable and entered code for Panasonic NZQAGB000002 where nothing different happened.

First thought was that Panasonic sometimes switch RCU codes so that one RCU doesn't turn everything on/off at once - Checked spec and isn't the case.

Guess it's one for 'Oil Drum Row' but thought mention - Chris.