Forum > LCD TV forum
Sony KDL-32EX703 - No signals.
Turnip:
Hi folks,
Have one that works otherwise normally, but no DVB channels show a picture, and when re-scanned the set finds nothing.
Guess could be a tuner issue but no lightning in this area recently - Any thoughts - Thanks - Chris.
downunder:
Hi Chris,
Try a factory reset. Can give you details if unsure. If it doesn't restore DVB, the it's plan B.....off to Oil Drum Lane.
Bruce
Turnip:
Hi Bruce and thanks,
Went to try a 'factory reset' as you suggested but the set came on showing pictures on every channel where yesterday there was now't but the OSG with 'No Signal'
These edge lit Led backlight sets can be curious. Incidentally, cust couldn't get a picture either, so not me - Honest.
SSB 1-881-636-21 so thought try find one on Ebay - None for this model, but have had problems with similar ones where whatever is below the heat sink at the top of the panel tends to be heat sensitive and gives 'Oil Drum Row' issues - Chris.
Turnip:
Hi Folks,
Although set now works normally, thought try 'service mode' where in the manual pressing -
Display/CH5/Vol+/Power on RCU quickly should do the biz - It didn't, but neither the user guide nor manual specify where the 'display' button is on the RCU.
Tried also do a 'factory reset' by holding down the top button on the cursor key ring then pressing S/by button on set - Didn't work either.
Had a bit of luck as some channels were blocked, tried 4 zeros but then read that 9999 clears any customer code, and it did - Win some - Chris.
downunder:
Hi Chris,
Here's the good oil:
From standby press Display (Info) > 5 > Vol+ > Power. If necessary, press Option or Jump to get into digital mode.
Press 8.....SVCE changes to green RST.
Press Mute...RST EXE command is displayed.
Press 0....EXE RST displays green EXE, then red indicating TV is writing data.
When complete, the green SVCE text displays.
Cycle the AC power. Done. See how it behaves after that.
Bruce
Navigation
[0] Message Index
[#] Next page
Go to full version