Author Topic: schematic needed please  (Read 5000 times)

0 Members and 1 Guest are viewing this topic.

vinceroger69

  • Full Member
  • ***
  • Posts: 78
    • Email
schematic needed please
« on: May 18, 2016,18:17:08 »
for a psu:6709900016b LGp2637hep psu many thanks or does anyone know what causes the constant clicking relay issue on these many thanks.

Mulja tv repair portal

schematic needed please
« on: May 18, 2016,18:17:08 »

downunder

  • Hero Member
  • *****
  • Posts: 1200
Re: schematic needed please
« Reply #1 on: May 19, 2016,05:19:49 »

And the TV model is??

Bruce

sparky

  • Hero Member
  • *****
  • Posts: 1223
    • Email
Re: schematic needed please
« Reply #2 on: May 19, 2016,05:28:49 »
Lgp2637 in above query

Mulja tv repair portal

Re: schematic needed please
« Reply #2 on: May 19, 2016,05:28:49 »

downunder

  • Hero Member
  • *****
  • Posts: 1200
Re: schematic needed please
« Reply #3 on: May 19, 2016,06:32:46 »

Not familiar with this model. Is it a plasma?

vinceroger69

  • Full Member
  • ***
  • Posts: 78
    • Email
Re: schematic needed please
« Reply #4 on: May 19, 2016,07:06:47 »
Sorrys guys its a LG 32LC2D  set ive downloaded various manuals none seem to have a full psu schematic only parts.

downunder

  • Hero Member
  • *****
  • Posts: 1200
Re: schematic needed please
« Reply #5 on: May 20, 2016,04:40:02 »
PSU caps are usually the go with these + the 8 pin smd mosfet Q209 going short. Relay contacts can also cause it.

Bruce

Mulja tv repair portal

Re: schematic needed please
« Reply #5 on: May 20, 2016,04:40:02 »

vinceroger69

  • Full Member
  • ***
  • Posts: 78
    • Email
Re: schematic needed please
« Reply #6 on: June 14, 2016,04:42:14 »
Thanks guys so far ive fully recapped the psu and replaced the 2 mosfets and ic in the 5v and 3.4 volt section although the psu now runs with no clicking and all the other voltages are fine still no 3.4 volts has anyone got a shematic for this psu 6709900016 B so we can try to fault find etc many thanks guys.

Mulja tv repair portal

Re: schematic needed please
« Reply #6 on: June 14, 2016,04:42:14 »

 

download
download
download
download