Author Topic: Refer to Power Supply AYP418101 (Read 5055 times)

Herbert-Georg · « **on:** December 08, 2016,05:57:20 »

Please, does anybody knows the value of the resistors R91 and R 92 which are used to create the 12V / 5 Amp.

Best regards
Herbert-Georg

Mulja tv repair portal · « **on:** December 08, 2016,05:57:20 »

fix2003 · « **Reply #1 on:** December 09, 2016,02:41:27 »

try this
may help

Herbert-Georg · « **Reply #2 on:** December 11, 2016,09:48:24 »

Yes, the circuit diagram is shown, but there is no page with the values of the two resistors R91 qnd R92. I can't read the value on the resistors itself, because they overheated and one is broken.
Best regards
Herbert-Georg

Mulja tv repair portal · « **Reply #2 on:** December 11, 2016,09:48:24 »

Turnip · « **Reply #3 on:** December 11, 2016,11:12:15 »

Just checked a board -

Both marked 101 and measure dead on 50 Ohms - Guess that SMD cap in series (C19) must be well cremated - Chris.

Forgot to mention they're connected in parallel (if no schematic)

jordan · « **Reply #4 on:** December 11, 2016,11:37:49 »

http://www.tv.quuq.org/forum/index.php?topic=9602.msg29592#msg29592

Herbert-Georg · « **Reply #5 on:** December 21, 2016,11:03:35 »

Thank you very much for your assistance. I'll try to get those resistors and I hope to succeed with your help.

Best reagards Herbert-Georg

Mulja tv repair portal · « **Reply #5 on:** December 21, 2016,11:03:35 »

Mulja tv repair portal

News: