Bush LE-40GCL-A1 Eeprom issues ?

[Turnip]

Hi folks,

Just got one in where Red s/by turns to Blue and then flashing Blue and steady Red. No functions at all.

Tend to suspect corrupted Eeprom 25Q64 flash. Note the two different screens use different bins, mine is the T395HJ-PE1-DY2  V-A2.

Read somewhere that if the set has a 'cycling backlight' the M'Proc will corrupt the new Eeprom. My backlight does nothing.

Any thoughts ? - Chris.

Later - Got replacement Eeprom so blanked original and copied new bin - Set now turns on, backlight functions but no OSG. Thought check T/con fuse - Volts either side. Noticed that the backlight cuts out for a second every minute, which looks like backlight cycling and maybe a duff M/Proc.
Waiting for an Eeprom for the other screen version - Will give it a go then upload bins to Quuq as might be useful. Loaded the other Bin file - Red Led and no go at all - Guess new board.