Forum > LCD TV forum

Linsar 37LCD507 (Vestel)

(1/2) > >>

Turnip:
Hi folks,

Got one in where it usually comes on normally, but after a while the Red S/by Led flashes at second intervals with the set still working normally, then it cuts to S/by and sometimes comes on again, or not.

Changed the usual suspects in the P/S but no difference so suspect it's the 17MB70-5P V1 050511 SSB. Wonder if anyone has had the problem ? - Thanks - Chris.

leeeroy:
is it enough 37 for 20 meters room?

Turnip:
Hi Leeeroy,

It's great for folks with a short span of attention - Your's really cheap - Chris.

Davy:
If its a 17MB25 main board, check this out, might be some info you can dig out.

https://quuq.org/forum/index.php?topic=5814.0

Dave

Turnip:
Thanks Dave,

It's a 17MB70-5P main board with a heat sink covering the M/proc. Noticed similar with Sony 'EX' series, where the heat sink always indicates SSB death, and unlike LG you can't cook 'em to perfection.

Noticed several on Ebay, but they're hens teeth, and usually 42 inch versions up at £65.00 plus. As it's a 2009 set, don't think to bother.

Guess a known SSB issue, though I usually like Vestel if I get the panel codes right - Chris.

Navigation

[0] Message Index

[#] Next page