Forum > LCD TV forum

Linsar 37LCD507 (Vestel)

<< < (2/2)

astracat:
hi turnip
just  let u know electotania does a firmware for that panel listed under different makes
always copy original and try one of those it may cure yours if not can always put original back,used to work for agent to several makes of tv ie pana,sony hitachi and was always told to update firmware first as it often cured miscellanias faults
regards
astracat

Turnip:
Thanks 'Cat'

Downloaded from Electrotanya as you suggested. Want to get original firmware on USB stick (Just in case) but can't find the option using Menu 3725 or 7935 where can copy NVRAM data - Any thoughts ? - Chris.

astracat:
hi turnip
alway useto copy with seperate programmer so not sure at moment but will see if any other way to copy will need to look at a circuit first
will get back to you asap
regards
astracat

astracat:
hi turnip
had a look at diagram but no way to copy original from set .have you tried reset? if so would suggest checking 3.3v supply and crystal x1,x2 had intermitant crystals before theres also a 1uf from pin 37 off m/processer as tend to find low value caps go o/c
regards
astracat
ps just uploaded diagram

Navigation

[0] Message Index

[*] Previous page