Forum > LCD TV forum

Bush LED48304UHDT2 - Said to go off.

(1/2) > >>

Turnip:
Had this Argos wonder in last year, where after doing a channel scan it seemed OK.

Came in again today with the same issue, but after a re-scan it missed out some channels and picture looked every bit like weak signal though other sets in the WS were OK.

Wonder if there's issues with this model ?  Chris.

Davy:
Have you checked the supplies are 'hash free', sounds like memory being corrupted, when you say weak signal what does the signal strength indicate or is it actual picture? Trying a video input to by-pass the tuner might throw some light.

Dave

Turnip:
Thanks Davy,

Admit haven't yet taken the back off to discover who made it, as it's Bush and likely crap from Eastern Europe. Mind you it uses the Philips RC5 RCU code, so might be a Vestel - Hopefully.

Guess take the back off tomorrow and see the worst - Chris.

Turnip:
Hi Davy,

Had a look and it's a Vestel with no identifying info - Attach a SSB picture.

Seems OK, but only with a very strong signal, otherwise misses most channels. Guess tuner dubious as aerial socket seems OK.

As a Bush, nothing on line or Ebay apart from RCU and stand screws - Chris.

Davy:
Might be under the heat sink, trust you looked on underside. Think it's a  23299522   (17MB100)

Not some stupid AGC setting in factory set up menu is it?

Dave

Navigation

[0] Message Index

[#] Next page