LG RZ-42PX11

[markc]

HI,
could anyone help with a problem with this set?
A few months ago the ZSUS panel failed & was replaced.
Now the YSUS panel has failed and has been replaced, but the picture is very poor and there is patterning on the screen.

Is there a service menu & if so how do you access it.

Thanks

[terminator2k2]

hi there, is the patterning like sparklies on the picture.??

if so the v up and v down need adjusting on the y sus board...

let the set warm up for roughly 30 mins then adjust as nescesry.....i found that i couldnt totaly get rid of them when the set was cold, so as the set warmed up they would disapear....lg said it wasnt a fault with the set just an ageing pdp pannel....

[markc]

Thanks for the reply. The adjustment has cured the sparklies, but I still have the patterning. This is in narrow vertical bands travelling from left to right across the screen. Only present on tv signals, not av inputs.

Mark

[markc]

the v up and v down  adjustiments on the y sus board cured the sparklies.
The patterning was down to the aerial system. This set appears to be particularly sensitive to this.

[BC109]

At the bottom of the panel is earthing tape, bronze coloured. Make sure it's in tact, if not replace it.