BUSH LCD37TV016HD LCDTV GOES ON STANDBY ONLY ###HELP###

[stylesclash2k8]

Ive had my 37" Bush LCD for 14 months now and now when i plug it back in, the blue standby light appears but then it wont turn on it just goes back to standby, no picture no sound, occasionally it will turn on fully but after few mins turn itself back off and dont go back on, can any1 tell me how fix this problem cos i cant afford 2 goout and get another cos money dont grow on trees(if it did id plant a forest lol)

[watteau]

Hello,
This Bush model uses a PROVIEW chassis, it is possible the power-supply
is at fault (dried up electrolytics etc.).
Try https://www.chsinteractive.co.uk, for parts for this model - the power supply
is listed at £90!
Sorry can't be more explicit, as we have no service information on these chassis's.
Good Luck!
John.

[tv tony]

if you have no joy with psu we do them, cheaper than £90, just £64.95, but as previous writer said electrolytics are fav.
tony walker

[p0dster]

i have same tv only just 12 months old very simular fault except nothing but a ticking noise coming from the tv when mains power is applied no lights that i can see on the front, i suspect the psu. would ask tv tony if there is any chance of a link to the site for a replacement one @ £65.00 or any further help ie schematics of the psu
here is a picture of the psu in my set attached

it is a Bush
LCD37TV016HD Pcb PSU PROVIEW MLT198H

regards
alan

[sathacker]

I have the same TV which came with the same fault but now I come to check it I find it is now dead. The onboard fuses are ok but it does occasionally blow the mains fuse, checked switches etc and ok.

Have looked for replacement PSU only to find it obsolete/discontinued. No obvious component stress, would
appreciate a pointer on this or where I may find a PSU.

[sparky]

have you checked the electrolytics it not a quick job
but should cure the fault

[Turnip]

Hi folks,

Proview MLT198H Power supply has a habit of popping off around the PFC section.  Shematics seem not to be available to replace just the few cremated thingys. If anyone has a good one - silly really, as if you had a good one you wouldn't check.

Think to attach a pic - Chris.

[sathacker]

Replaced all the caps but still dead, blowing the internal fuses now.. Really need a new/refrubished PSU if anyone knows of a source.