Author Topic: SHARP LC 32SD1E (Read 6998 times)

phillotus · « **on:** October 08, 2008,15:59:29 »

hi everyone i currently have 2 of the above sets infor repair with the same fault ,which is colour very distorted flickering back ground either blue or green not as bad when contrast turned right down please see attached photos

Mulja tv repair portal · « **on:** October 08, 2008,15:59:29 »

mulja · « **Reply #1 on:** October 10, 2008,05:33:37 »

Check LVDS cable from main board to screen
pull it out clean and put it back.

phillotus · « **Reply #2 on:** October 17, 2008,02:33:59 »

set now repaired it is the eeb setting in service mode need to enter service mode then clear both eeb setting

Mulja tv repair portal · « **Reply #2 on:** October 17, 2008,02:33:59 »

mulja · « **Reply #3 on:** October 17, 2008,04:53:39 »

How enter service mode?

phillotus · « **Reply #4 on:** October 20, 2008,15:06:29 »

to enter service mode
1 switch to standby then unplug from mains
2 press and hold V- and input buttons on front panel while plugging in
3 letter K should be displayed
4 press and hold V- and P- buttons to enter service mode
5 unplug to exit service mode

Mulja tv repair portal · « **Reply #4 on:** October 20, 2008,15:06:29 »

Mulja tv repair portal

News: