Author Topic: Thompson 32lb130 (poss non uk) (Read 14540 times)

repoman · « **on:** February 08, 2007,04:33:05 »

I need to find a supplier for the sub smps pcb chs or seme cannot help as thompson say they dont recognise the model number,customer bought from car boot sale !
the set has worked but the relay on this panel switches mains to the main smps and this sub board has now failed,the ic on this panel cannot be identified by anyone tried for over 2 weeks,if anyone can help let me know......... andy

Mulja tv repair portal · « **on:** February 08, 2007,04:33:05 »

mulja · « **Reply #1 on:** February 08, 2007,05:01:45 »

This seems to be a French Model LCD TV. Maybe some uk models use the same chassis. If you could send picture of chassis we will have a look at it. Send by RAR or Zip format

repoman · « **Reply #2 on:** February 08, 2007,05:29:50 »

i will sort some photos later but the numbers on the board are as follows.
pcb smps 1W EFC031E
ifc130/ifc230
2146896a

Mulja tv repair portal · « **Reply #2 on:** February 08, 2007,05:29:50 »

Visualimageservices · « **Reply #3 on:** February 21, 2007,11:29:08 »

I may have a new one of these. I brought a psu for a 32" lb but the fault was else were and the board was a special order with no refund it cost 186+vat

can you forward me a photo or psu numbers and i will check it out

repoman · « **Reply #4 on:** March 31, 2007,04:44:20 »

problem solved at last phone call to customer service standby psu part number received ordered fitted fixed Â£27 board good result if not a lengthy one.

Mulja tv repair portal · « **Reply #4 on:** March 31, 2007,04:44:20 »

Mulja tv repair portal

News: