Author Topic: Technosonic LCD2603 (Read 6397 times)

bob-meade · « **on:** November 27, 2008,14:11:11 »

Hi Folks
I purchased one of these from Big-pockets, & whilst it works, there seems a lot of overscan....IE the edge of the picture is missing. Has anyone else had this problem?
Would it be eeprom Tony?
Cheers if you can assist.
Bob

Mulja tv repair portal · « **on:** November 27, 2008,14:11:11 »

tv tony · « **Reply #1 on:** November 30, 2008,02:53:19 »

NOTHING SILLY IS IT, WRONG ASPECT RATIO SETTING, ITS CAUGHT OUR SALES GUYS OUT

bob-meade · « **Reply #2 on:** November 30, 2008,04:41:55 »

Thanks for your reply Tony, trouble is whilst you can change the size & shape using the remote, with true 16/9 transmissions, there is lots of missing information on both sides.....plug into the scart a freeview or Skybox set to 16/9, no problems......I guess the problem lies within the built in DTR tuner.
Bob

Mulja tv repair portal · « **Reply #2 on:** November 30, 2008,04:41:55 »

rebel-mc · « **Reply #3 on:** November 30, 2008,13:05:16 »

Hi, This is a known fault. The same fault occurs on the Tevion 26" tv's as well.

bob-meade · « **Reply #4 on:** November 30, 2008,16:53:08 »

Hi Rebel
Thanks for that bit of info, has anyone found a cure - apart from plugging in an external box that is?!
Cheers
Bob

rebel-mc · « **Reply #5 on:** November 30, 2008,17:14:14 »

I don't think there is a cure for it. The tevion (aldi) tv's were replaced with a slightly diffent model that didn't have this problem.

Mulja tv repair portal · « **Reply #5 on:** November 30, 2008,17:14:14 »

Mulja tv repair portal

News: