Author Topic: PHILIPS 42PF9945/12 POWER FAULT ? RELAYS CLICK THEN DOES NOTHING  (Read 11926 times)

0 Members and 1 Guest are viewing this topic.

teletechs

  • Newbie
  • *
  • Posts: 1
    • Email
HI, I HAVE A PHILIPS 42PF9945/12 WHICH SWITCHES ON, THE RELAYS CLICK, THEN DROPS TO STANDBY WITH LED FLASING RED. PLEASE COULD ANYONE HELP ON THIS. THANKS

Mulja tv repair portal


brainstorm

  • Hero Member
  • *****
  • Posts: 329
    • Email
Re: PHILIPS 42PF9945/12 POWER FAULT ? RELAYS CLICK THEN DOES NOTHING
« Reply #1 on: December 19, 2008,07:22:21 »
Hi, this is a plasma set you might get a  better response if you post it on the plasma section.
Try this:
Measure the voltage on test point "D3R3V" adjacent to connector CN8001
in the right bottom corner of the PSU board.
If below 3.3 V, increase it to 3.5 V +/- 0.1 V by adjusting potmeter
VR8009 (in the middle of the PSU board), with all cables and the SSB
still connected.

badrick

  • Jr. Member
  • **
  • Posts: 18
  • plasma & lcd repairs used and new parts supply
    • http://www.andyselectronicstuff.co.uk/
Re: PHILIPS 42PF9945/12 POWER FAULT ? RELAYS CLICK THEN DOES NOTHING
« Reply #2 on: January 01, 2011,10:07:33 »
for anyone with this problem you will most likely need this repair kit
http://www.andyselectronicstuff.co.uk/plasma_tv_board_repair_kits.html

thanks
andy


http://www.andyselectronicstuff.co.uk/index.html
www.andyselectronicstuff.co.uk

plasma & lcd repair service

Mulja tv repair portal

Re: PHILIPS 42PF9945/12 POWER FAULT ? RELAYS CLICK THEN DOES NOTHING
« Reply #2 on: January 01, 2011,10:07:33 »


Mulja tv repair portal

Re: PHILIPS 42PF9945/12 POWER FAULT ? RELAYS CLICK THEN DOES NOTHING
« Reply #3 on: January 06, 2011,08:56:32 »

 

download
download