Author Topic: Dell w4201c Plasma No Pic Samsung Guts... Help! (Read 6719 times)

ck-x · « **on:** February 15, 2009,09:11:13 »

I have a 42" Dell W4201C Plasma... I have no Pic on the TV... I have pulled the back cover and found that the voltages were not right on the test points in TV... Removed cable from Power Supply to XSUS board and problem persists.. Removed Power Cable to YSUS board and problem persists... Removed power from both boards and I get good voltages on the power supply... I would assume the problem is in these 2 boards... Is there something else I should look for or is there a common failure on these boards like a cap or something? The TV has samsung guts in it... Below are the model #'s... Some schematics would be nice if anyone may have some... :aggressive:Let me know if you can help...

PDP Panel S42AX-YB01

XSUS LJ41-02758A

YSUS LJ41-02759A

Thanks for any help you can give...

Mulja tv repair portal · « **on:** February 15, 2009,09:11:13 »

tv tony · « **Reply #1 on:** February 17, 2009,06:02:52 »

unfortunately there are not any schematics available for z,y boards, test your psu with a dummy loaad to isolate that section
tv tony

ck-x · « **Reply #2 on:** February 17, 2009,15:43:07 »

What should I use as a dummy load for testing the PSU? I think it was about 175V DC...

Mulja tv repair portal · « **Reply #2 on:** February 17, 2009,15:43:07 »

tv tony · « **Reply #3 on:** February 21, 2009,13:52:26 »

because these set suffer from failure under load

Mulja tv repair portal · « **Reply #3 on:** February 21, 2009,13:52:26 »

Mulja tv repair portal

News: