Author Topic: Samsung LE40R88BDX/XEU  (Read 5387 times)

0 Members and 1 Guest are viewing this topic.

norman

  • Sr. Member
  • ****
  • Posts: 147
    • Email
Samsung LE40R88BDX/XEU
« on: February 20, 2009,17:56:06 »
Hi folks, I have a problem with this tv. Every time you switch on the picture setting is set to dynamic. If you reset it in menu, next time you switch on it reverts to dynamic again. I have searched menu's to see if there is a setting or storage for this.I have also done a factory reset but the problem remains. I have a similar set in for repair which comes on at whatever the last pic setting was. Any suggestions please? Thanks, Norman
« Last Edit: February 20, 2009,17:58:54 by norman »

Mulja tv repair portal

Samsung LE40R88BDX/XEU
« on: February 20, 2009,17:56:06 »

BARRYMCQ

  • Newbie
  • *
  • Posts: 6
    • Email
Re: Samsung LE40R88BDX/XEU
« Reply #1 on: June 03, 2009,07:39:26 »

The lcd must be set-up in shop mode, re-tune in home mode and you will have no issues with this.

sparky

  • Hero Member
  • *****
  • Posts: 1223
    • Email
Re: Samsung LE40R88BDX/XEU
« Reply #2 on: June 17, 2009,15:02:38 »
Hi
 to disable shop display switch to anolgue d'not use remote control press vol + at side of tv
release then at the side press menu for approx 6 sec's when you release it should display
dynamic this means its set for home display d't try to do it in digi mode. Then you can do a full factory reset it works on 99% of samsungs

Sparky

Mulja tv repair portal

Re: Samsung LE40R88BDX/XEU
« Reply #2 on: June 17, 2009,15:02:38 »

 

download
download
download
download