« previous next »
Pages: [1]   Go Down

Author Topic: led standby light flashes tv not firing up  (Read 6858 times)

0 Members and 1 Guest are viewing this topic.

phusky

  • Newbie
  • *
  • Posts: 0
    • Email
led standby light flashes tv not firing up
« on: February 14, 2007,07:03:54 »
bush lcd27tv600hd
switch power on..........stanby led light on
use remote or press led switch..........led light just pulses on and off continuesly
tv does not power up.
      any suggestions.
Logged

Mulja tv repair portal

led standby light flashes tv not firing up
« on: February 14, 2007,07:03:54 »

mulja

  • Administrator
  • Hero Member
  • *****
  • Posts: 337
    • Tv repair portal
    • Email
(No subject)
« Reply #1 on: February 15, 2007,04:08:46 »
Check 5v and 3.3v regulators.
Logged

phusky

  • Newbie
  • *
  • Posts: 0
    • Email
(No subject)
« Reply #2 on: February 15, 2007,10:45:02 »
thnx mulja, did check outputs...seemed ok but will recheck.
                         phusky
Logged

Mulja tv repair portal

(No subject)
« Reply #2 on: February 15, 2007,10:45:02 »

adm2007

  • Full Member
  • ***
  • Posts: 55
(No subject)
« Reply #3 on: August 22, 2007,10:11:20 »
normaly 1000fd capie bulged in power supply
Logged

dskservices

  • Jr. Member
  • **
  • Posts: 15
Re: led standby light flashes tv not firing up
« Reply #4 on: July 03, 2008,06:48:38 »
capacitors in power supply are a common problem on these.
Logged

Mulja tv repair portal

Re: led standby light flashes tv not firing up
« Reply #4 on: July 03, 2008,06:48:38 »
Pages: [1]   Go Up
« previous next »
 

download
download