hi everyone
i need help in plasma dantax 42" no screen led green on .
psu very very noisey .
voltage from psu ok vs 190v va 65v vstb 5v and allso in scop ok .
i found pcp ydrv bottom (2 ic's blown and 2 smd resistor open)
i replaced new ydrv and ysus new the problem still no screen.
and power suplly still noisey.
any help will grate.
number on psu (usp 440m-42lp unicorn)
Topic: dantax plasma 42" (panel LG pdp v7) (Read 6205 times)