« previous next »
Pages: [1]   Go Down

Author Topic: Technosonic LCD3251 Reddish Screen after dismantling.  (Read 4579 times)

0 Members and 1 Guest are viewing this topic.

Adge

  • Guest
Technosonic LCD3251 Reddish Screen after dismantling.
« on: April 14, 2009,16:58:55 »
Hi All

I have a Technosonic LCD3251 32" TV. I repaired a faulty 3.5mm audio jack socket (PC sound input)and replaced on Input(s) circuit board. No other repairs were attempted. I removed most of the connectors on said board and replaced as found. Since reassembling I have a poor quality reddish picture on all inputs. I can see no obvious problems i.e.missing connectors, broken wires etc. The sound is OK.

Has anyone any suggestions as to where I go next?

Many Thanks

Adge   
Logged

Mulja tv repair portal

Technosonic LCD3251 Reddish Screen after dismantling.
« on: April 14, 2009,16:58:55 »

tv tony

  • Spell checked unlike some posts.
  • Administrator
  • Hero Member
  • *****
  • Posts: 615
    • Email
Re: Technosonic LCD3251 Reddish Screen after dismantling.
« Reply #1 on: April 22, 2009,07:06:39 »
usually caused by rough handling of the lvds cable, (the cable that supplies power and video to the display)
40 in stock
Logged
Spell checked unlike some posts.

tv tony

  • Spell checked unlike some posts.
  • Administrator
  • Hero Member
  • *****
  • Posts: 615
    • Email
Re: Technosonic LCD3251 Reddish Screen after dismantling.
« Reply #2 on: April 26, 2009,11:22:16 »
hello, the lvds cable is very fragile, i am confident that this will cure your problems, but there are two types, at the pcb end one is a thin flat one that plugs into j21, the other goes into j102, we do both.
Logged
Spell checked unlike some posts.

Mulja tv repair portal

Re: Technosonic LCD3251 Reddish Screen after dismantling.
« Reply #2 on: April 26, 2009,11:22:16 »
Pages: [1]   Go Up
« previous next »
 

download
download
download