Author Topic: LG 32LC2D sound problem. (Read 5608 times)

froggy · « **on:** May 14, 2009,07:51:10 »

hi, i have an LG 32LC2D which has developed a sound problem, its o,k for a few minutes then the sound starts to break up until its virtually non existent, this also coincides with a buzzing sound that is coming from the powerboard, in standby its buzzing a little but when its switched on the noise gets noticably louder, i found 1 cap that had domed on top so replaced that but still no different, any help would be appreciated :wink:

Mulja tv repair portal · « **on:** May 14, 2009,07:51:10 »

tv tony · « **Reply #1 on:** May 14, 2009,09:09:42 »

hello, cap number please, and is it on psu, main or board on right hand side?

froggy · « **Reply #2 on:** May 14, 2009,09:55:29 »

Quote from: tv tony on May 14, 2009,09:09:42

hello, cap number please, and is it on psu, main or board on right hand side?

hi tony, yes the cap i replaced is on the psu [1000uf 16v] [c208], ive since located the noise around transformer [T500] & transistor [q123] on the psu, dont know if this helps at all.,,,,many thanks.

Mulja tv repair portal · « **Reply #2 on:** May 14, 2009,09:55:29 »

tv tony · « **Reply #3 on:** May 15, 2009,02:56:57 »

hello again, if the 19v line from the psu is stable and correct i think the bulged cap may have been an additional issue, these sets suffer from the audio ic failing, some sets have a heat sink over the output ic, some dont, but they do fail, if you feel able to change one they are available, or we can supply a full board.
many thanks
tony walker

froggy · « **Reply #4 on:** May 15, 2009,06:29:29 »

hi tony, im fine with fitting an IC as long as it isnt a surface mounted one, i can get a board for about £50 s/hand unless of course you are cheaper :biggrin2:, also would you have the IC number to hand as ive put the set back together for now & itll save me taking it apart again,,,many thanks

Mulja tv repair portal · « **Reply #4 on:** May 15, 2009,06:29:29 »

Mulja tv repair portal

News: