Author Topic: Bush LCD19W008HD Service Mode or change to PAL B/G (Read 8626 times)

Homework · « **on:** June 22, 2009,02:52:16 »

Hi there,
Does anyone know how to access the sevice mode of Bush LCD19W008HD?

I am desparate to change the TV tuner standard to PAL B/G from PAL I. Its is factory set to PAL I and the normal menu does not let me change it.

Any help on this is greatly appreciated.

Mulja tv repair portal · « **on:** June 22, 2009,02:52:16 »

tv tony · « **Reply #1 on:** June 22, 2009,04:31:11 »

sorry for late reply, menu is accessed by pressing menu 4725, then on you can select desired options. good luck
tony

Homework · « **Reply #2 on:** June 22, 2009,07:43:51 »

Hi Tony,
Thanks for the reply. While the TV was on, I pressed Menu, 4, 7, 2, 5 as you stated. The service menu does not get activated through this sequence.

Mulja tv repair portal · « **Reply #2 on:** June 22, 2009,07:43:51 »

tv tony · « **Reply #3 on:** June 22, 2009,08:47:28 »

i will swot up on it
tony

Homework · « **Reply #4 on:** June 22, 2009,10:37:57 »

Thanks ........

Homework · « **Reply #5 on:** July 23, 2009,12:57:03 »

Found the factory menu;

On remote press - Disp, Red, Green, Yellow, Disp

However, this does not let you change PAL I to PAL B/G.

Mulja tv repair portal · « **Reply #5 on:** July 23, 2009,12:57:03 »

Mulja tv repair portal

News: