Author Topic: lcd graetz(beko)  (Read 5767 times)

0 Members and 1 Guest are viewing this topic.

WILLYAM1

  • Hero Member
  • *****
  • Posts: 310
    • Email
lcd graetz(beko)
« on: June 27, 2009,01:37:52 »
hi everyone.
i have lcd graetz model .
nr gr 30cwlb9 beko chasis L6B.
PROBLEM IS POWER ON LED GREEN IS LIGHT BACK LIGHT IS ON FOR 2 SEC AND THEN OFF.
IS ANYONE HAS THE SAME PROBLEM (PSU IS OK 12V 24V 3.3V OK).
INVERTER BOARD???.
WILLYAM1

Mulja tv repair portal

lcd graetz(beko)
« on: June 27, 2009,01:37:52 »

mulja

  • Administrator
  • Hero Member
  • *****
  • Posts: 337
    • Tv repair portal
    • Email
Re: lcd graetz(beko)
« Reply #1 on: June 27, 2009,05:35:19 »
Yes inverter board
one of transformers faulty

check resistance between pin 1 and 8, 4 and 5 al of transformers
to find faulty one.

Good luck

WILLYAM1

  • Hero Member
  • *****
  • Posts: 310
    • Email
Re: lcd graetz(beko)
« Reply #2 on: June 28, 2009,14:16:45 »
mulja thanks for repyling me i will check your advice and get back to you.
 if one of the transformer is bad were can i get it???.
willyam1.

Mulja tv repair portal

Re: lcd graetz(beko)
« Reply #2 on: June 28, 2009,14:16:45 »

WILLYAM1

  • Hero Member
  • *****
  • Posts: 310
    • Email
Re: lcd graetz(beko)
« Reply #3 on: June 28, 2009,14:38:58 »
hi again dose anyone has schamatic diagram for inverter board made by DARFON modelV144-001.
IT FOR LCD BEKO CHASIS L6B.
WILLYAM1

lubos55

  • Sr. Member
  • ****
  • Posts: 127
    • Email
Re: lcd graetz(beko)
« Reply #4 on: June 28, 2009,15:28:59 »
hi again dose anyone has schamatic diagram for inverter board made by DARFON modelV144-001.
IT FOR LCD BEKO CHASIS L6B.
WILLYAM1

Hi,the inverter board is not described in service manual L6B.It is policy of producers.

WILLYAM1

  • Hero Member
  • *****
  • Posts: 310
    • Email
Re: lcd graetz(beko)
« Reply #5 on: June 29, 2009,06:33:10 »
thanks to mulja and lubos55 for reply.
i checked transformes resistence.
7 transfo resistance are the same resis between pin 1 to 8(980 ohom).
resis pin 4-5(970 ohom).
1transf resis pin 1-8(980 ohm)and pin 4-5 (1350 OHM).
 I'Mnot sure that transf is the problem in this inverter.
could be ic oz960g-any way a new board  cost 100 USD''.
I HOPE COSTOMER EXEPET MY OFFER  TO REPLASING A NEW BOARD.
WILLYAM1

Mulja tv repair portal

Re: lcd graetz(beko)
« Reply #5 on: June 29, 2009,06:33:10 »

 

download
download
download
download