Author Topic: onn lcd3201 (Read 5889 times)

sparky · « **on:** November 08, 2009,10:22:05 »

hi
help if poss i have picture but no sound
have connected audio out to surround system ok
main board 17mb08p-5
all volts seem ok no signs of any components burnt
out
sparky

Mulja tv repair portal · « **on:** November 08, 2009,10:22:05 »

Turnip · « **Reply #1 on:** November 08, 2009,10:40:56 »

Hi Sparky,

  Think I have good 17MB08P-5 should you become desparate - smashed screen AcSol LCDW3210S

  Nunchucks should rule - Chris.

  PS - I need a 17MB24.1-1 - AcSol LCD32805HD - mine has distorted sound - all outputs.

sparky · « **Reply #2 on:** November 08, 2009,12:05:20 »

thanks for reply have found heating sound ic with
hairdryer sound back on froze with freezer off
again will try and unsolder and fit new one
sparky

Mulja tv repair portal · « **Reply #2 on:** November 08, 2009,12:05:20 »

WILLYAM1 · « **Reply #3 on:** November 08, 2009,15:07:22 »

HI SPARKY.
hade a same problem in vestel chasis (dont remember the chasis).
found 2 ele capi in ps not ok leading vcc to sound ic whith big ripple.
check with scop.
willyam1

tv john · « **Reply #4 on:** November 08, 2009,15:56:26 »

Do you have audio through headphones?If so,could be muted at pin 34 of ic702. Don't have any other info.
John.

sparky · « **Reply #5 on:** November 08, 2009,17:11:46 »

hi
thanks for info's will check it out
sparky

Mulja tv repair portal · « **Reply #5 on:** November 08, 2009,17:11:46 »

sparky · « **Reply #6 on:** November 09, 2009,11:05:08 »

hi
tried headphones they work but sound cannot be altered
no up or down for headphones cust does not want to pay much ,they have
spare sound system for computer tried in audio skt works
cust will use for a bit longer tv not digitail
sparky

Mulja tv repair portal · « **Reply #6 on:** November 09, 2009,11:05:08 »

Mulja tv repair portal

News: