Technika LCD32-207 17mb12-2 dump needed

[quaduplex]

Hi all,

This is my first post. I am a newbie to TV repair but learning fast  used to repair CB radios and Car stereos back in the day when I was in school!

Bought myself a £9 eprom programmer from ebay (thought I had one incorporated in my old PIC programmer but after checking; nope)

I'm after a dump for a 17MB12-2 160807 out of a Technika LCD32-207 - Chi Mei panel? eprom is a 24C64

Many thanks in advance,

Simon

[quaduplex]

Ermmm..... do i need to go through some sort of initiation or salute to get a reply on this board or can no one help?

Please don't read the above comment the wrong way; I'm not being blunt 

[tv tony]

erm, most of us had a break, it was xmas, but i will look for you
tony walker

[quaduplex]

erm, most of us had a break, it was xmas, but i will look for you
tony walker

Apologies, of course and thanks. I've seen from other posts you can supply main boards for these? Just in case.

[lubos55]

Hi,

try this dump.

[quaduplex]

Thanks for that! Seems my main board is now totally dead as it won't even bring up a blue led (PSU had been repaired and was ok)

So I need a replacement 17MB12-2  :wallbash:

[quaduplex]

Hi all, I've sourced a 17mb12-2 but its for a 26". Am I right in thinking that the eeprom holds the information for screen size and the boards are just generic?

[tv tony]

hello, i think you may find the ribbon is different that feeds the info to the screen
tony walker

[quaduplex]

Thanks for the heads up Tony. Ah well, the hunt goes on...