Author Topic: Philips/Xerox 900W (Read 6568 times)

stellaman · « **on:** February 11, 2010,13:42:26 »

Hi, have 2 of these in at the moment with same symptoms.They power up ,gives a 'no signal' dialog box then goes off/ LED goes out.Inverter volts seem OK. Any help appreciated, Thanks Dave

Mulja tv repair portal · « **on:** February 11, 2010,13:42:26 »

JAYROD · « **Reply #1 on:** February 11, 2010,18:56:12 »

Is that a monitor or tv dave. I am at the moment viewing this on a XEROX 900P which i repaired about 2 years ago,it had the same fault symptoms. There will probably be some electrolytics need replacing on the psu/inverter board. Get that fancy ESR meter of yours out.

stellaman · « **Reply #2 on:** February 12, 2010,05:43:51 »

Thanks Jayrod will revisit the PS. Found out C10/11/19 can cause problems.

Mulja tv repair portal · « **Reply #2 on:** February 12, 2010,05:43:51 »

Mulja tv repair portal

News: