Faulty LCD Power Supply PCB (IPLV-42 Rev 1.4) Looking for replacement

[dariusz]

Hello There,

I'm hoping that someone in the forum can assist me with a LCD power supply.

The power supply has the product code: IPLV-42 Rev 1.4.

There is another post (link below) which has pictures of the power supply board.

          http://www.tv.quuq.org/forum/index.php?topic=2061.0

There seems to be a few post in this forum relating to the above power supply, but no conclusion - ie. the questions posted have not been answered.

Hence for my post.

I live in Australia, Sydney.

My IPLV-42 Rev 1.4 is faulty board (faulty power supply PCB) and out of my Leaderman 42" LCD which I wish to repair.

The IPLV-42 Rev 1.4 seems to be in a few LCD's. The two which I know are - ATEC 37" LCD & Leaderman 42" LCD. My faulty power supply PCB comes from a Leaderman 42" LCD.

I looking for a IPLV-42 Rev 1.4 replacement. Can anyone help?

Other questions I have are:

1. What other LCD screens use the IPLV-42 Rev 1.4 PCB power supply board. This may help me locate a board.

2. Is there a schematic available for the IPLV-42 Rev 1.4? ie. can someone send me it, or do you know where to get it?

3. Is there another PCB power supply board which can be used as a replacement to the IPLV-42 Rev 1.4?

4. The IPLV-42 Rev 1.4 board has the following web site details: www.ipt.co.kr. It seems to be a Korean company called "International Power Technology". Does the company still exist or go by another name? The email on the web sit no longer works, and the news section of the web site is outdated. I was hoping to go to the manufacturer to buy a replacement board.

5. Is there any company (ie. repair mob) which may have the IPLV-42 Rev 1.4 board which I can contact? And details (company name, email, phone, country) is appreciated.

6. Is there a company in Australia which may be able to repair my IPLV-42 Rev 1.4?

7. Does anyone have a IPLV-42 Rev 1.4 which i can buy or know where I can get one?

Any assistance to my post is appreciated,

Look forward to the feedback.

Regards,

Dariusz

[Turnip]

Hi, only thoughts are in attachment.

Good luck, and keep us posted - Chris.

[JAYROD]

See ATEC370W in this forum also EVERSHAM.
 
    phil.

[dariusz]

Hi Chris (Turnip), I'll have a look at the attachment. Thank you.

Phil (Jayrod), Can you help me. I've places 'ATEC370W' and 'EVERSHAM' into the search and all that I get is the results of the post you have posted...?

Is there a change you can post some links to the post you are referring too?

Thank you and look forward to your reply.

Dariusz

[dariusz]

Hi, only thoughts are in attachment.

Good luck, and keep us posted - Chris.

Hi Chris (Turnip), I've opened up the file which you attached in your earlier post. The contents only had:

"ATEC AV370W       P/S   IPLV42 rev 1.4
1. Q101 duff and C203 (or 4) bulgy"

I do not know what to make of it. Can you please help?

Look forward to your reply.

BTW, if any one can answer - Are there any other forums / web sites where I can try posting my earlier question to fix / replace my power supply pcb?

Thanks

Dariusz

Dariusz

[JAYROD]

Dariusz go to page number 3 in lcd repair section and look at ATEC AV370W PSU PROBLEM.

   phil.