Author Topic: tv metz (Read 7452 times)

WILLYAM1 · « **on:** April 12, 2010,08:22:29 »

hi everyone.
i need service code for tv metz model 25d36.
its in lock .
there is a picture of the tv and the remote.
thanks willyam1

Mulja tv repair portal · « **on:** April 12, 2010,08:22:29 »

ahmad63 · « **Reply #1 on:** April 16, 2010,11:59:03 »

write the u computer number?

Κώστας · « **Reply #2 on:** April 17, 2010,01:51:53 »

test with 9706

Mulja tv repair portal · « **Reply #2 on:** April 17, 2010,01:51:53 »

chrissie jones · « **Reply #3 on:** April 17, 2010,02:33:27 »

metz are allso minoka.

alish · « **Reply #4 on:** April 24, 2010,09:58:04 »

1- press and hold "F" + "MENU"
2- press and hold "F" + "MUTE"
(on remote control)
good luck

DJING_2004 · « **Reply #5 on:** April 24, 2010,15:54:32 »

Got a Hitachi Rear Projection Tv Model #65F59A
I REPLACE THE DP6X DEFLECTION P.W.B.
BOARD WITH A USED ONE... BUT WORKING BOARD BECAUSE IT HAD A OPEN PICO FUSE 3AMP FUSE ON IT OPEN REPLACE THE PICO FUSE WITH OTHER ONE AND NOW A LIT GREEN LCD LIGHT IN THE MIDDEL OF THE BOARD LIGHTS ON AND OFF AND THE RELAY STARTS CHICKING ON AND OFF A LOTS OF TIMES ..AND NOW THIS SECOND DEFLECTION BOARD WENT DEAD TOO AFTER 1WEEK OF WORKING GOOD ,.....CHECK THE PICO FUSE ON IT AND ITS BAD TOO LIKE THE FIRST ONE AND ITS DOING THE SAMETHING AS THE FIRST BOARD WHAT IS MAKEING THE FUSE TO GO BAD ...HELP

GREEN LCD LIGHT IS..... D905

PICO FUSE 3AMP .....E947

Mulja tv repair portal · « **Reply #5 on:** April 24, 2010,15:54:32 »

Mulja tv repair portal

News: