Author Topic: le32a456c2d (Read 7188 times)

sparky · « **on:** May 15, 2010,04:02:15 »

hi
the above tv works in a fashion ,dig,anolg,scarts all ok,bt
no hdmi inputs tried factory reset,no better any idea's.
blue ray no go,sky hd no go
thanks
sparky

Mulja tv repair portal · « **on:** May 15, 2010,04:02:15 »

daz · « **Reply #1 on:** May 15, 2010,09:19:31 »

hi sparky
when in service mode,in the option table menu were there any hdmi settings ,on the le40r88 sets it should read, hdmi hotplug 1,hdmi clk ctrl 1,hdmi hp dly 9.
perhaps somthing similar is required here?
worth a check
daz

sparky · « **Reply #2 on:** May 15, 2010,10:22:05 »

hi
in service mode the setting very sim to le40r88 but all seem ok,
cannot find a correct table of setting for le32a456c2d
sparky

Mulja tv repair portal · « **Reply #2 on:** May 15, 2010,10:22:05 »

sparky · « **Reply #3 on:** May 18, 2010,13:11:37 »

hi
had to change motherboard u/g from another shop
they supplied the parts no staff
sparky

tv john · « **Reply #4 on:** May 21, 2010,14:32:33 »

I think most of these samsung lcd models are the same in that the HD input will appear blank untill an
HD device is connected to the tv. Worth a thought.
John.

sparky · « **Reply #5 on:** May 21, 2010,16:22:45 »

hi
cust was watching bluray film thro hdmi 1 - hdmi 2 hd
sky not available same when power cut happened
20 sec later power restored no hdmi at all
sparky

Mulja tv repair portal · « **Reply #5 on:** May 21, 2010,16:22:45 »

Mulja tv repair portal

News: