Author Topic: SONY CX-1 Chassis KV-DB29M60 (Read 7846 times)

tammu · « **on:** May 26, 2010,21:48:22 »

Pin cushion is not getting corrected.Remains cut in picture from both the sides.replacing pf in horizontal section no help.replaced NJM2903 pin amp ic also no help.what could be the problem?
thanks

Mulja tv repair portal · « **on:** May 26, 2010,21:48:22 »

Turnip · « **Reply #1 on:** May 28, 2010,12:21:27 »

Hi,

Model number doesn't help, what's the chassis ? - Chris.

P.R.Gore · « **Reply #2 on:** May 28, 2010,14:11:07 »

Hi Tammu,
Check & replace components C6857,L6815,R6932,L6803,Q6801. These r the likely components which usually fail in such cases. If this do not help open service menu & check EW drive. Coils may become short, if so rewind them. Good luck!
:happy:

Mulja tv repair portal · « **Reply #2 on:** May 28, 2010,14:11:07 »

Turnip · « **Reply #3 on:** May 29, 2010,13:10:58 »

Hi - So what's the chassis, for other Quuq folks who might have the problem ? - Chris.

P.R.Gore · « **Reply #4 on:** May 29, 2010,14:33:02 »

Obviously chassis no is CX-1. Turnip!

Mulja tv repair portal · « **Reply #4 on:** May 29, 2010,14:33:02 »

Mulja tv repair portal

News: