Thomson 40KW611 (ICC21)

[Turnip]

Hi Folks,

Have one of these where on switching on, the S/by light turns red to amber then eventually flashes red in a three/three sequence.

Any ideas ? Thanks, Chris.

[daz]

hi chris
only fault i have listed is cp150, 2200uf causes the 6v live to go dicky
good luck
daz

just checked highland electrix they have error 33 as lopt

[Turnip]

Thanks Daz,

Checked Highland myself - didn't realise  3 + 3 was error 33.   Should have guessed but never have thought Thomson that logical.

Will check the cap, and chuck if it's LOPT - Chris.