Author Topic: Schematic of power supply MLT-169B REV:1.2 (Read 13767 times)

chandra · « **on:** August 23, 2010,16:43:23 »

Hi,
This is NASH NTFT-3203CX model.When pressing st/by switch the red led goes to green.And the power supply unit gets the st/by on voltage from main board also.But the power supply is not getting on.It is MLT-169B REV:1.2. I checked the main parts and did not get any faulty one part.Anybody have the same problem?

Mulja tv repair portal · « **on:** August 23, 2010,16:43:23 »

Turnip · « **Reply #1 on:** August 24, 2010,11:28:41 »

Hi Chandra,

Guess it's a Metmeet Power supply - haven't met MLT-169B yet - glad for a piccy - Chris.

chandra · « **Reply #2 on:** August 24, 2010,15:47:31 »

I am sorry .Because the power supply model no is changed.It is SHL 3208-125 REV:2.0.I attached the picture of the supply.

Mulja tv repair portal · « **Reply #2 on:** August 24, 2010,15:47:31 »

uzaykemer · « **Reply #3 on:** October 23, 2014,05:20:21 »

Quote from: Turnip on August 24, 2010,11:28:41

Hi Chandra,

Guess it's a Metmeet Power supply - haven't met MLT-169B yet - glad for a piccy - Chris.

Mulja tv repair portal · « **Reply #3 on:** October 23, 2014,05:20:21 »

Mulja tv repair portal

News: