Author Topic: HAIER 26LR1 (Read 4423 times)

WILLYAM1 · « **on:** September 02, 2010,01:47:17 »

hi to all .
this tv works fine and after about 20 -30 min screen become white.
by power off and on again screen is ok for another 20 min.
ther is no tcon or lvds board a flat cabel from main board to scrren .
any aidia????.
willyam1

Mulja tv repair portal · « **on:** September 02, 2010,01:47:17 »

Turnip · « **Reply #1 on:** September 03, 2010,12:53:50 »

Hi W/1,

Don't have it listed, and never met a LCD without a screen drive - yet.

Give us pictures - Chris.

Contrast John · « **Reply #2 on:** September 03, 2010,13:09:33 »

Hi Guys
Sounds like the screen may be faulty. When the fault is present try holding the top corners of the television and giving it a twist. If the fault clears then most likely the screen is faulty.
Regards
John.

Mulja tv repair portal · « **Reply #2 on:** September 03, 2010,13:09:33 »

WILLYAM1 · « **Reply #3 on:** September 03, 2010,15:18:27 »

thanks turnip and contrast jhon.
I pulled out LVDS CABELput it back and power on tv is workink ok about 8 hour ok .
dont know why but its workink.
willyam1

Mulja tv repair portal · « **Reply #3 on:** September 03, 2010,15:18:27 »

Mulja tv repair portal

News: