Toshiba 32YT56B2 - Vestel AK49-7

[Turnip]

Hi folks,

Have one of these where on switching on and bringing out of standby, set clicks a few times (degauss), sometimes a normalish raster appears, sometimes not, then set cuts to s/by and can only be brought on again by on/off switch.

Had that 'Vestel Eeprom' feeling but AK49 isn't known for that problem, more M/proc failure - geometry seems normal and HT is 150'ish -  secondary diodes are OK and nothing smokes.

Any thoughts ?  - Chris.