Bush IDLCD32TV05HD

[lil paul]

Hello all,
i have a problem with this BUSH IDLCD32TV05HD set, its seems theres alot of people looking for this fault to be fixed, my board thou is the 11 pin board not the 7, the pic would come on for a few seconds then go off the sound was ok even when pic went off, it had a faulty switch i changed the switch i got nothing from it, no fuses blown just dead any one help on this? i cannot find any where that will sell me the psu board i noticed TMG had same prob's but he had the 7 pin psu not the 10 :(  

thks ahead guys

[sparky]

hi
when the pic went of did the backlites stay on,do you
get 24v supply to inverter
dave

[lil paul]

@ sparks, thks for return message, no light it all went black but sound was there, now sound gone aswell since i changed power switch

[lil paul]

sorry.....sparky

[lil paul]

@ sparky, 24 v there psu been checked aal's ok there, customer says, "we couldn't get the t.v to stay on with the switch some times so we used the remote control, now nothing" i been on this 9 days now and am lost lol

[sparky]

hi
check these caps c928,c929,c930,c931
dave

[lil paul]

if there the ones on the psu there cs12 cs13 cs14 cs15 on this board, there ok dave

[Turnip]

Hi folks,

What boards/maker are you on about - Gagging fer info as our Sparky normally/always does the full info bit.

In mild hopes - Chris.

[sparky]

post a pic of panel and what switch have you
replaced

[lil paul]

[lil paul]

ah ha lol found the way

[lil paul]

   Done all bulging caps, still nothing....  
Can anyone recomend some where, where i can buy the PSU Board for the Bush IDLCD32TV05HD ???  

[lil paul]

If you want the Bush IDLCD32TV05HD psu Board, put this code in on Google  >> FSP204-2F01<<  £50 it'll cost ya, Thks again guys......

[Turnip]

Hi Lil Paul,

Mains switches are now quite the Green Biz. And they're all total crap, like most things these days.

Bring back original 'MK' with those beloved meaty switches made with real solid copper what-nots, Silver/Gold awful thin plating seems not the biz, but hopefully makes a pound, for modern folks - Chris.

[lil paul]

yep yep, agree on that BIG time     thats the new switch i put in, some wanted £12:37 i got it for £6. still robbery if you look at what goes into it, i'll buy the new psu monday and hopefully "fingers crossed" that'll be that