Author Topic: Bush WS6671 Field Collapse  (Read 6243 times)

0 Members and 1 Guest are viewing this topic.

AndyH

  • Newbie
  • *
  • Posts: 1
Bush WS6671 Field Collapse
« on: July 26, 2007,06:58:51 »
Bush WS6671 with field collapse.

Initially an intermittent fault - would either switch on with full picture and then collapse after a 5-10 minutes OR switch on with collapsed field but restore after 5-10 minutes.

Now always collapsed at switch on. Normal picture can usually be temporarily restored by gentle tapping on the SCART connector.

This suggests a bad joint/pcb problem rather than component failure - but any suggestions on precisely where (around which components) to look for this?

Mulja tv repair portal

Bush WS6671 Field Collapse
« on: July 26, 2007,06:58:51 »

mulja

  • Administrator
  • Hero Member
  • *****
  • Posts: 337
    • Tv repair portal
    • Email
(No subject)
« Reply #1 on: July 28, 2007,10:06:06 »
Bush tv chassis 11ak19:
Check repair tips here for vestel
11ak19
http://www.download.nitd.co.uk/page.php?30

But i think just resolder frame chip .

steph.

  • Jr. Member
  • **
  • Posts: 23
(No subject)
« Reply #2 on: October 11, 2007,15:45:53 »
check the h-dy leads on top of tube neck for loose lead. Had it a few times.

Mulja tv repair portal

(No subject)
« Reply #2 on: October 11, 2007,15:45:53 »

 

download
download