Author Topic: sharp lc37p55 (Read 6401 times)

WILLYAM1 · « **on:** January 26, 2011,06:19:13 »

hi to all.
problem is.
by power with stby power in top of tv relay click and after a few sec relay clicks again no stbyled.
when push and hold the stby botton tv works fine and when rereasing relay clics and tv is off no red stbyled.
did the reset no cure.
help.
willyam

Mulja tv repair portal · « **on:** January 26, 2011,06:19:13 »

sparky · « **Reply #1 on:** January 26, 2011,07:33:36 »

hi
have you checked the earthing screws on inverter panel
if loose will trip off
dave

Kilroys · « **Reply #2 on:** January 26, 2011,08:39:22 »

Change this QSW-P0035GEZZ

Mulja tv repair portal · « **Reply #2 on:** January 26, 2011,08:39:22 »

WILLYAM1 · « **Reply #3 on:** January 26, 2011,13:42:11 »

thanks sparky and kilroys.
i check earthing screws in inverter all ok.
i will change the stby botton as you kilros says.
did you have the same problem??.
i notice that there is no signal to the inverter.
signal apear only when stby botton is constentetly pushed and back light and screen apear.
tried sevarel time the reset procedur no cure.any other suggestion?.
willyam1.
ic in inverteris bd9777

Kilroys · « **Reply #4 on:** January 27, 2011,03:05:06 »

Yes not only in P55 also in
LC32,37GA8 and LC32,37GA9 model
Same switch

WILLYAM1 · « **Reply #5 on:** January 27, 2011,07:27:41 »

thank you kilroys.
i will order it and keep you posted.
willyam1

Mulja tv repair portal · « **Reply #5 on:** January 27, 2011,07:27:41 »

WILLYAM1 · « **Reply #6 on:** February 01, 2011,07:17:04 »

Thanks to kilroys.
put today a new stby switch.
tv works great.
willyam1.

Mulja tv repair portal · « **Reply #6 on:** February 01, 2011,07:17:04 »

Mulja tv repair portal

News: