Author Topic: 26LD6200 (Read 4592 times)

primo · « **on:** February 05, 2011,17:47:00 »

Hi can anyone help me? bought a dual tv but it's a hitachi 26LD6200 the picture is out of alingnment was told that it was used for a monitor tried to connect to pc to re'align, but the pc or dvi are not in the scource menu when i turn the tv on the picture has a big black line about 3"inches wide and the right hand side of the picture is on the left side sorry abouyt the discription but not a tv engineer just trying to see if anyone can help me thanks in advance

Mulja tv repair portal · « **on:** February 05, 2011,17:47:00 »

sparky · « **Reply #1 on:** February 06, 2011,03:28:00 »

hi
try changing screen drive panel,but prob screen faulty
dave

epi · « **Reply #2 on:** February 06, 2011,06:45:00 »

Hi Primo
Check downloads for service manual, see Vestel 17MB11 (think thats your board),

Frank

Mulja tv repair portal · « **Reply #2 on:** February 06, 2011,06:45:00 »

Turnip · « **Reply #3 on:** February 08, 2011,12:19:45 »

Hi folks,

Have a couple myself with similar problems - screen RHS can be either broad vertical bands of colour or broad vertical bands of blackness.

Done the LVDS and Main board biz, more than once - guess it's the screen - Chris.

primo · « **Reply #4 on:** February 10, 2011,10:18:50 »

Hi thanks for all your help. IThink i will just take it to the recycle depot, and buy from new from now on.

Once again thanks

Turnip · « **Reply #5 on:** February 10, 2011,11:40:56 »

Hi Primo,

Set might be advertised on a certain site, and as it's full of good Vestel bits might earn you enough to buy a Technika - perhaps two, and with those nifty points - Chris.

Mulja tv repair portal · « **Reply #5 on:** February 10, 2011,11:40:56 »

Mulja tv repair portal

News: