Author Topic: VIT68001.95 REV:0 Inverter  (Read 10478 times)

0 Members and 1 Guest are viewing this topic.

epi

  • Sr. Member
  • ****
  • Posts: 125
    • Email
VIT68001.95 REV:0 Inverter
« on: February 07, 2011,07:17:50 »
Hi,

Looking for a VIT68001.95 REV:0 Inverter for a Techwood TK3208HDTDT

Frank
Problems worthy of attack prove their worth by hitting back (Piet Hein)

Mulja tv repair portal

VIT68001.95 REV:0 Inverter
« on: February 07, 2011,07:17:50 »

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Re: VIT68001.95 REV:0 Inverter
« Reply #1 on: February 08, 2011,12:27:05 »
Hi Frank,

Don't have one myself - Think board is a CMO + (whatnot)

Folks might have it listed that way, as I would - if I had one - all the best - Chris.

PS - Nice Piccy

epi

  • Sr. Member
  • ****
  • Posts: 125
    • Email
Re: VIT68001.95 REV:0 Inverter
« Reply #2 on: February 08, 2011,14:30:09 »
Hi Chris, located one at jimmies for near 40pds plus pp, others have it for over 90pds, here I used to get them for 35€ but they've run out, if customer clears the repair I'll order.
Set is Vestel:-
Main - 17MB12-2
PSU - 17PW20.1
Inv: VIT68001.95 REV:0

all the best
Frank
Problems worthy of attack prove their worth by hitting back (Piet Hein)

Mulja tv repair portal

Re: VIT68001.95 REV:0 Inverter
« Reply #2 on: February 08, 2011,14:30:09 »

epi

  • Sr. Member
  • ****
  • Posts: 125
    • Email
Re: VIT68001.95 REV:0 Inverter
« Reply #3 on: February 08, 2011,14:52:08 »
Don't see CMO anywhere but here is the sticker:-
CPT 320WF01SC
Problems worthy of attack prove their worth by hitting back (Piet Hein)


Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Re: VIT68001.95 REV:0 Inverter
« Reply #5 on: February 10, 2011,11:33:08 »
Hi again Frank,

Noticed that CPT is usually Darfon but the numbers were pure CMO - perhaps they're brothers-in-trade  - Chris.

Mulja tv repair portal

Re: VIT68001.95 REV:0 Inverter
« Reply #5 on: February 10, 2011,11:33:08 »

epi

  • Sr. Member
  • ****
  • Posts: 125
    • Email
Re: VIT68001.95 REV:0 Inverter
« Reply #6 on: February 10, 2011,14:36:19 »
Hi Chris,
Looked into Darfon but there Inverter page is unavailable at the moment.
The page below is interesting if you don't have it listed. May have a go at trying to repair the board (when I get back to work, on a forced holiday after small operation), maybe one of those 22pF¿? caps in the return circuit o/c. On another similar VIT board had high resitence in the output winding of one of the transformers, instead of aprox 1K had over 2K, in the one I have did check all the transformers and they seem ok.
http://www.allmatrix.fr/
al the best
Frank
Problems worthy of attack prove their worth by hitting back (Piet Hein)

Mulja tv repair portal

Re: VIT68001.95 REV:0 Inverter
« Reply #6 on: February 10, 2011,14:36:19 »

 

download
download
download