Author Topic: Wharfedale/Bush L26TA6A, L32TA6A, L37TA6A (Read 12030 times)

Monkfish · « **on:** February 08, 2011,10:11:13 »

Hi, I'm trying to source the service menu code for a Wharfedale L26TA6A LCD TV. I've tried a couple of codes from the web, but they don't seem to work. I believe this is the same TV as a Bush L26TA6A, or maybe it's the same code as L32TA6A or L37TA6A model. Thanks.

I just wanted to see if I could adjust the colour balance a bit better (temps aren't sufficient).

Mulja tv repair portal · « **on:** February 08, 2011,10:11:13 »

Turnip · « **Reply #1 on:** February 08, 2011,11:22:08 »

Hi M/F

Guess boards are Vestel - what's the mainboard ? (17MB + whatsit) or a nice sharp piccy - Chris.

Monkfish · « **Reply #2 on:** February 09, 2011,12:37:27 »

I'll have to get back to you on that one Turnip.

Mulja tv repair portal · « **Reply #2 on:** February 09, 2011,12:37:27 »

epi · « **Reply #3 on:** February 09, 2011,16:12:29 »

The Wharfedale L32TA6A has PY12038 main board (I think) added photo (from jimmies) and (sort of) schematic of PY12038.
Also these models under brand "Haier"
See if this helps:

Frank

Turnip · « **Reply #4 on:** February 10, 2011,13:00:54 »

Hi Frank,

You're right - def not Vestel - life get's worse - Chris.

watteau · « **Reply #5 on:** March 05, 2011,03:05:52 »

Hello,

HAIER SERVICE MODES:

MENU, 8, 8, 9, 3
or, handset keys 0,6,2,5,9,6 + 'DISPLAY' key. ( 'FAC' mode menu). Then select “Factory” item.
or, DISPLAY/INFO, P.MODE, S.MODE, SLEEP - USE 'E2P INT', TO INITIALISE THE EEPROM

See attached manual.

Regards,
John

Mulja tv repair portal · « **Reply #5 on:** March 05, 2011,03:05:52 »

Mulja tv repair portal

News: