acoustic solutions lcd32761hdf tv stuck in standby - flashing blue light.

[watteau]

Hi Rob,
Here' the Rev: 3 version, although they're all pretty similar,
Regards,
John.

[audi.e2.quattro]

hello there im new and i also have problems with the 17pw20 board but mine is the v 1 board ive been told a trick to over heat C878 and c877 and it work for a few mins but it went back to stantby mode

is there a quaick fix cause ive not got the parts at the mo ( due to lack of funds)
thanks

[sparky]

what do you need?

[audi.e2.quattro]

what do you need?

i would like to know if i could link c877 and c878 which are the cause of the standby problems (same has clueless??) but my board is the v1 board

or do i have to get new capacitors

p.s thanks for youre help

[LYNDON]

what do you need?

i would like to know if i could link c877 and c878 which are the cause of the standby problems (same has clueless??) but my board is the v1 board

or do i have to get new capacitors

p.s thanks for youre help

hi did you get result i got same problem

[HappyMatty]

Hey guys, Im new here and will try to help out in return but seriously doubt my electronic knowledge would help any of you guys xD anyway im posting here because a quick Google search showed me this place is the best when it comes to fixing televisions, and there is already a thread for me to hi-jack!

So i have the 17PW20.1 (version 1?????) board of the same television(AS LCD32761HDF), with the same problem! cant get past standby.

under closer inspection the Q814, C878 or Q840 piece emits a spark whenever i try and power up, I'm not sure if this information helps but common sense tells me that just isn't right.

Anyway, looking to buy a repair kit, hopefully not a full new board, and was hoping you guys (and gals) could point me in the right direction!

Thanks in Advance!
Matt!

[malrap]

Common faults with these are usuallyQ814,Q813,C877 and/orC878(15nF 1000v must be 5%tolerance,Ic289,C817,C801,C901 and C892.As aksed by one of the Posters, you do have to replace C877and its mate C878,and have had that fault a number of times.Last week the only fault on one of these boards was Qty2 x bulged caps C817 and c857.To buy the proper caps C877 etc, had to purchase though Ebay to China, and bought qty 10 off to make the purchase worthwhile...will soon need more.

[Icantthink]

Hi

Rob

Check the items in Red, remove the diodes from the board to check..especially the one to the left of the main transformer (which is probably the suspect)

The caps I circled in blue check the values and if one is 2700uf x either 16v or 25v change it, if you struggle getting a 2700 pop a 3300 of the same voltage as removed, I have never had any problems doing this...just dont put a 2200 in

The component circled in green just check for cold joints and to be on the save side desolder and get some tin/lead solder on there  

And to confirm what watteau said, version 3 is near on identical, I think the only difference is the flick switch on the side of the tv, hence the black and white 110/240v connectors to the top right of the board

Hope this helps

[bazsc]

i have a 42" accoustic solutions lcd tv its stuck in standby model number lcd42762hdf circuit board number 17pw12-2 anyone have any ideas please