Author Topic: JVC AV-27FA44 ASA dead?  (Read 7286 times)

0 Members and 1 Guest are viewing this topic.

wcv308

  • Newbie
  • *
  • Posts: 1
    • Email
JVC AV-27FA44 ASA dead?
« on: April 06, 2011,00:08:04 »
Well, when I first plug in the TV I get a thin blue horizontal link in the center of the screen, just long enough to get a glimpse of it, then its as if the tube has no power it goes completely off and I am left with the green power light blinking...

Any help you guys can give will be greatly appreciated
Thanks

Mulja tv repair portal

JVC AV-27FA44 ASA dead?
« on: April 06, 2011,00:08:04 »

TellyFun

  • Jr. Member
  • **
  • Posts: 24
    • Email
Re: JVC AV-27FA44 ASA dead?
« Reply #1 on: April 07, 2011,21:25:39 »
You have a line collapse,I would check the line output transistor to see if s/c,if so it will be caused by some evil dry joints .

daz

  • Hero Member
  • *****
  • Posts: 377
Re: JVC AV-27FA44 ASA dead?
« Reply #2 on: April 08, 2011,03:34:11 »
I would say frame collapse if its horizontal, but do agree to check for dry joins (on the frame chip)
but i might be wrong, and not for the first time.
daz

Mulja tv repair portal

Re: JVC AV-27FA44 ASA dead?
« Reply #2 on: April 08, 2011,03:34:11 »

TellyFun

  • Jr. Member
  • **
  • Posts: 24
    • Email
Re: JVC AV-27FA44 ASA dead?
« Reply #3 on: April 08, 2011,16:25:09 »
Whoops,read that a bit to quick must slow down,yes horizontal line left to right :72: yes is frame collapse,
but when i read back is that the correct model number?

Mulja tv repair portal

Re: JVC AV-27FA44 ASA dead?
« Reply #3 on: April 08, 2011,16:25:09 »

 

download
download
download
download