Author Topic: samsung 40 inch lcd (Read 6753 times)

kennyc · « **on:** April 12, 2011,06:37:22 »

me again have got the usual samsung with the two 2200uf caps bulging but the tv is still working with a dark picture . i can turn up the brightness but i have a flicker on the screen. suspect eeprom may be faulty but havent changed . i cant get the digital menu to come up and even though i can tune the analogue channel no stations appear only snow. have tried resetting on service menu but no change . any ideas thanks

Mulja tv repair portal · « **on:** April 12, 2011,06:37:22 »

Kilroys · « **Reply #1 on:** April 12, 2011,09:49:45 »

Look at the Options
http://www.tv.quuq.org/forum/index.php?topic=2377.msg8701#msg8701

mulja · « **Reply #2 on:** April 12, 2011,09:50:33 »

Hi

try go to service menu
options
and
change ready on to off

Mulja tv repair portal · « **Reply #2 on:** April 12, 2011,09:50:33 »

sparky · « **Reply #3 on:** April 12, 2011,11:02:15 »

just change the eeprom i/c
dave

kennyc · « **Reply #4 on:** April 13, 2011,07:19:49 »

did as advised and went to options in the service menu and turned reset from on to off and tuning fault was fixed . original fault was the two 2200uf caps.tv then came on but could not get digital menu tried to reset eeprom by shorting pins 5 @ 6 out . also went into option 8 of service menu and did a reset but when i went to the digital menu it just came up with "not available" fault now fixed . have had this fault a couple of times before after replacing caps but customer has usually had sky or virgin so it didnt matter thanks for your help

sparky · « **Reply #5 on:** April 13, 2011,09:45:26 »

hi
sometimes a reset will not work had same fault yesterday,
change eeprom fault cured
dave

Mulja tv repair portal · « **Reply #5 on:** April 13, 2011,09:45:26 »

kennyc · « **Reply #6 on:** April 13, 2011,10:12:28 »

thanks dave . like i say it was just the usual fault and the reset didnt work . but i went to options on the service menu and the first one down says reset on as soon as i pushed the on to off the digital picture came back .

mulja · « **Reply #7 on:** April 13, 2011,11:59:02 »

Not a reset on
but ready on need change to off

sinclairtv · « **Reply #8 on:** April 13, 2011,13:58:56 »

Makes you wonder how many times he'll be told to change the eeprom before it sinks in

sparky · « **Reply #9 on:** April 13, 2011,14:43:07 »

hi
just like flogging a dead horse
dave

kennyc · « **Reply #10 on:** April 13, 2011,19:14:06 »

hallo again , the whole point of my reply dave was that the eeprom did not need to be replaced . all i did was to go into service menu go to options and go from reset on and change to off and problem solved.

sparky · « **Reply #11 on:** April 14, 2011,03:48:53 »

hi
say no more if you are happy
dave

Mulja tv repair portal · « **Reply #11 on:** April 14, 2011,03:48:53 »

Mulja tv repair portal

News: