Author Topic: bush..idlcd27tv006  (Read 6438 times)

0 Members and 1 Guest are viewing this topic.

chrissie jones

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 874
  • disk jocky for 32 years.started tv repairs 1985.
    • Email
bush..idlcd27tv006
« on: April 29, 2011,03:29:49 »
this tv was stuck in stby so i changed the normal cap in the power supply.now tv is working fine but backlite gose off after a few minites.switch tv back off/on it comes back then gose of again after a few mins.can you help please.

Mulja tv repair portal

bush..idlcd27tv006
« on: April 29, 2011,03:29:49 »

daz

  • Hero Member
  • *****
  • Posts: 377
Re: bush..idlcd27tv006
« Reply #1 on: April 29, 2011,09:58:39 »
hi chrissie
check all the capacitors they sometimes pop out of the bottom rather than belly out the top and can be quite hard to spot, also check the smoothing block and have a good check for dry joints.
good luck
daz

chrissie jones

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 874
  • disk jocky for 32 years.started tv repairs 1985.
    • Email
Re: bush..idlcd27tv006
« Reply #2 on: April 29, 2011,10:08:17 »
thanx daz.but i resoilded  all bad looking joint on power supply,now working fine.fingers crossed :13:

Mulja tv repair portal

Re: bush..idlcd27tv006
« Reply #2 on: April 29, 2011,10:08:17 »

 

download
download
download
download