Author Topic: LCD screen replacement. (Read 5892 times)

davef292 · « **on:** June 21, 2011,07:58:33 »

Hi guys, newbie here with a question about replacing damaged screens.

I have a Samsung LE32A457C1D with a damaged screen and a Wharfedale / Vestel LCD37F1080P with a damaged screen and a power supply board fault. (Stays on stand-by and stand-by light flashes once afrer a few seconds of switching it on, then stays in stand-by. Im looking to swap the whole board 17PW20-V2.

The Samsung has an AU Optronics T315XW02 VL screen and the Wharfedale an AU Optronics T370HW02 V2 fitted.

My question is: Can I replace the screens with other makes of screen, or would they need to be replaced like-for-like? IE: AU Optronics.

Any help and advice would be appreciated.

Thanks in advance.

Davef292

Mulja tv repair portal · « **on:** June 21, 2011,07:58:33 »

sinclairtv · « **Reply #1 on:** June 21, 2011,13:57:06 »

Based on past experience, try it and see. If the plugs are the same it wont do any damage. I had a Samsung with a broken screen that I replaced with a screen with the same pt no and guess what..it didnt work as there was a ribbon cable on the replacement. So pt nos on screens are just a guide I presume

jimca007 · « **Reply #2 on:** June 21, 2011,16:16:50 »

Just a word of caution.... I'm all for the " suck it ans see " approach and sometimes if the plug fits it will work but I found to my cost recently even if they look the same and have the same connector sometimes the wiring's different and you'll get a nice wee cloud of smoke as the vga protection chip starts to burn off the motherboard ! Cost me £ 60 for a new board and still had to source a compatible screen ... so beware there are risks to substituting look a like parts.....

Mulja tv repair portal · « **Reply #2 on:** June 21, 2011,16:16:50 »

Turnip · « **Reply #3 on:** June 24, 2011,12:34:28 »

Hi,
Must agree as replaced a Vestel main with one with same 17MB number and carbonated a little 6 pin chip/whatnot top LHS - Chris.

jimca007 · « **Reply #4 on:** June 24, 2011,14:32:20 »

Thats the one small chip gives you a nice wee cloud of smoke !!

chrissie jones · « **Reply #5 on:** June 25, 2011,03:13:43 »

ive got a screen to fit that samsung model...

Mulja tv repair portal · « **Reply #5 on:** June 25, 2011,03:13:43 »

davef292 · « **Reply #6 on:** June 25, 2011,13:09:05 »

Quote from: chrissie jones on June 25, 2011,03:13:43

ive got a screen to fit that samsung model...

Is it an AU Optronics screen?

How much do you want for it?

thanks for all replys.

Cheers Dave.

chrissie jones · « **Reply #7 on:** June 26, 2011,03:19:05 »

yes, it the same screen.open to offers.

TELLO6 · « **Reply #8 on:** June 29, 2011,11:28:48 »

Sorry to join the conversation, but you avoid a disaster.
It is necessary to take into account the following;
The T315 screen is powered by +5 v.
The T370 screen "" "+12 V.
Greetings.

chrissie jones · « **Reply #9 on:** June 30, 2011,01:46:40 »

thanx for the info mate...

Mulja tv repair portal · « **Reply #9 on:** June 30, 2011,01:46:40 »

Mulja tv repair portal

News: