Author Topic: Profilo psu (05ta071b) (Read 5373 times)

dougc · « **on:** July 30, 2011,09:21:09 »

Hi, Has any one experienced a Profilo psu 05ta071b getting very hot. It works fine for 20mins but as it gets hot the dvb does funny things. I can run it via a scart all day with no problems (apart from the overheating) Doug

Mulja tv repair portal · « **on:** July 30, 2011,09:21:09 »

sparky · « **Reply #1 on:** July 30, 2011,11:58:43 »

hi
dougc whats the model number
dave

Turnip · « **Reply #2 on:** July 30, 2011,13:06:47 »

Hi Doug and Sparky,

Have a piccy - it was ever caps and yet more caps (Wilts do this nice low ESR 2200/16 that will hold any Profilo at bay for at least 3 months)

Glad not to see any new models - Chris.

Mulja tv repair portal · « **Reply #2 on:** July 30, 2011,13:06:47 »

dougc · « **Reply #3 on:** July 30, 2011,14:35:31 »

Hi Dave/Chris, the model is idlc27tv006. I think I've changed all the usual suspect caps.

jimca007 · « **Reply #4 on:** August 02, 2011,11:00:55 »

Bush has been using that psu for quite a while they suffered from problems with the 2 zen diodes at the right hand side just above the centre heat sink but to be fair haven't seen one of these for a while ( thankfully
I do know theres a kit for it but that was more for blowing fuses, let it run for a while power it down and give it the old wet finger on the various heat sinks see where your building heat could be a mosfet gettin a bit leaky.... good luck !

dougc · « **Reply #5 on:** August 09, 2011,11:35:37 »

Hi All, Thanks for your input. I,m admitting defeat on this one so if any one has one for sale I would appreciate it. I'll even accept a faulty one providing the fault isn't overheating!!!! Cheers, Doug.

Mulja tv repair portal · « **Reply #5 on:** August 09, 2011,11:35:37 »

Mulja tv repair portal

News: